Inspection IDReason for InspectionInspection DateInspection Status 
SIN-00287170 Renewal 04/14/2026 Compliant - Finalized
RegulationLIS Non-Compliance AreaCorrection RequiredPlans of CorrectionCorrection DatePOC Status
6400.67(a)On 4/15/2026 at approximately 10:30 AM, there was a circular hole in the wall that was approximately 1 inch diameter located in Individual #1's bedroom directly to the right of the bedroom door. On 4/15/2026 at 10:36 AM, there was an approximately 2 inch by 3 inch hole in the wall directly in front of the washer and dryer in the utility closet to the right of the front door.Floors, walls, ceilings and other surfaces shall be in good repair. Immediate Corrective Action (What has been done to fix the issue) Date Completed: 04/15/2026 The identified wall damages were immediately assessed by the Compliance Manager and Maintenance. The hole in the utility closet was professionally repaired, including patching, sanding, and repainting to restore the walls to safe and acceptable condition. A new wall protector plate was placed behind the door where the handle hits the wall when the door is pushed open with too much force. Both repairs were made the same day of inspection. The areas were inspected post-repair to ensure there were no remaining hazards (e.g., sharp edges, exposed materials). 04/30/2026 Implemented